Great Plains DICKEY-john AI-120 12-inch Virtual Terminal - Manual (Page 86)

OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606B-201310
78 / AUTO SECTION CONTROL SETUP
MODULE OUTPUT ASSIGNMENT EXAMPLE
1. Three solenoid outputs to be controlled by Tru Count output module.
2. Number of rows assigned to each output.
3. Row shutoff switches assigned to corresponding outputs.
4. Corresponding row shutoff switches will turn sections on and off.
Figure 110
Module Output Assignment
IMPLEMENT SECTION CHECK
IMPORTANT: After clutch row assignment, it is recommended to
perform a diagnostics check to verify the order of clutch
sections shut on and off correctly. Refer to the
Diagnostics section of the IntelliAg Operator’s manual
for section check instruction.