Great Plains DICKEY-john AI-120 12-inch Virtual Terminal - Manual (Page 159)

OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606B-201310
OPERATION / 151
START AND STOP TASK
Tasks can be manually started and stopped or linked to the master switch.
When in task data mode, an extra option is added to the Setup screen to
select how tasks can be started and stopped.
To Set the Start/Stop Function:
1. At the Setup menu, select System/ISOBUS/TC.
2. Select the Stop Task button and select one of the following:
– Manually (must manually start and stop tasks regardless of the
master switch state)
– Manually or master switch (start and stop tasks both manually and
via master switch)
3. Press the Check button to accept.
Figure 217
Start and Stop a Task
CLEARING JOB DATA
Clearing a job resets a job file that already has a coverage map drawn. The
coverage map is erased and all recorded job data is reset. A job must be
cleared from the system before a new job is created and started.
To Clear a Job:
1. Press the Task Data Menu button
2. Select the Clear Job Data button.
3. Select Yes to clear the current job and reset job totals.
Figure 218
Clearing a Job