Great Plains DICKEY-john AI-120 12-inch Virtual Terminal - Manual (Page 140)

OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606B-201310
132 / AS APPLIED JOB SETUP
SELECT AN EXISTING JOB
Job information can be recorded, stored, and transferred for later access.
IMPORTANT: Typically a client or farm is selected prior to selecting a
job. However, a situation may occur to use a job from
another field or another client or farm. In this instance, a
different client or farm can be selected in the Select Job
window and will copy from where it originated into the
currently active client/farm/field.
1. Before selecting an existing job, verify the correct field is selected.
2. Press the Job Menu button.
3. Press the Select Job button.
4. At the Select Job Window, press the Client or Farm tab to view the list
of job files.
5. Select the job and press the OK button to accept.
– Changing the client, farm, or field in the Select job window allows
importing of a job from a neighboring field. This is useful to reuse
common information stored within the job, such as weather
observations, crop information or product application notes. The
coverage should be cleared manually before starting a new job.
– The same implement used to create the job must be selected to
load an existing job.
Figure 193
Select An Existing Job