Great Plains DICKEY-john AI-120 12-inch Virtual Terminal - Manual (Page 64)

OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606B-201310
56 / TERMINAL SETUP
Figure 86
Look Ahead Indicator on Vehicle Icon
STEERING DISENGAGE--Triggers an alarm when autosteering is
disengaged.
STEERING ENGAGE--Triggers an alarm when autosteering is engaged.
STEERING UNABLE TO ENGAGE--Autosteering is unable to engage due
to a system malfunction, possibly lost GPS or steering malfunction.
GPS RECEIVER FIRMWARE MISMATCH--only applies when an AGI-3
receiver is connected to the AI-120 terminal.
ASC10 ECU FIRMWARE MISMATCH--not applicable to IntelliAg
VT HIGH PRIORITY--A high priority alarm indicates a system performance
error has been detected that could potentially effect operation and should
be addressed immediately.
VT MEDIUM PRIORITY--A medium priority alarm appears in a popup
window to alert of a condition outside of normal operating parameters.
Acknowledge alarm pressing the Check button and address the issue when
possible.
VT LOW PRIORITY--A low priority alarm appears in a popup window to
alert of a condition outside of normal operating parameters. Acknowledge
alarm by pressing the Check button and address the issue when possible.