Metrohm 761 Compact IC - Manual (Page 157)

4.5 Chromatograms
761 Compact IC
147
Component name + Quantity
Name and quantity of the component.
Channel labels Label for data acquisition channel.
At start Channel label is shown at the start of the chro-
matogram.
In corner
Channel label is shown in the upper right corner
of the chromatogram.
Show baseline and peaks
Baselines are shown.
Baseline marker Start and end of baselines are marked.
Label always visible Label is shown always with zooming.
Set all Set peak labeling of all opened chromatograms
automatically to the settings in the selected
chromatogram window.
Draw every chromatogram point
Show chromatogram with all measured points
(disable smoothing).
Select channel
Tab
Select channel of the Appearance window for selection of channels
for multi-channel chromatograms.
Selection window The selection window shows all chroma-
tograms of the batch reprocessing queue which
can be selected for display. If total is selected,
all chromatograms are added and the resulting
addition curve is shown.
Select all chromatograms in the selection win-
dow.
Deselect all chromatograms in the selection
window.