Metrohm 761 Compact IC - Manual (Page 131)

4.4 Methods
761 Compact IC
121
Additionally, the Components table contains the following buttons:
Add a new component (an empty column) to
the component table.
Delete the current component from the compo-
nent table.
Open the
Peak identification
window (see Identi-
fication).
Open the Concentration table (see Concentration
table).
Open the component window with display of
calibration curve and calibration parameters.
Accept all changes and close the Component ta-
ble .
Reject all changes and close the Component ta-
ble .
The standard methods supplied with the «761 Compact IC» program all
contain a component table with pre-defined components with entries
for the names and retention times.
If the output of all peaks is required in the result report then a so-
called universal component can be defined in the component table
for this purpose; this receives the value 0 in the Time field and no peak
is allocated to it. The name entered under Name (e.g. unknown ) is then
used for all peaks for which no component can be allocated.
Peak identification
761 COMPACT IC / Method / Calibration / Identification
Selecting this menu item or clicking on in the compo-
nent table opens the Peak identification window with parameters for tun-
ing the peak identification procedure.
Number of components Number of components in the component table
(read-only).
Scheme Quick choice of identification parameters
scheme.
Standard Set default meanings of identification parame-
ters: Height for reference components, Time for
all other components (ordinary components).
Nonstandard Set custom meanings of identification parame-
ters.