Metrohm tiBase 1.0 Manual - Manual (Page 95)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Configuration
tiBase 1.0 ￭￭￭￭￭￭￭￭ 87
Selection on | off
Default value off
FDA default: on
Range 1 ... 10 Characters
Default value 6 Characters
FDA default: 6 characters
Validity
If this check box is activated then this ensures that the user must enter a
new password before the validity period expires. When a user logs in whose
password will expire within the next 10 days a corresponding message will
appear. If the validity period has expired, the user can only log in if he
changes the password.
Selection on | off
Default value off
FDA default: on
Range 1 ... 999 days
Default value 365 days
FDA default: 365 days
3.2.2.3 Test login for password monitoring by Windows
Tab: Configuration ▶ Tools ▶ Security settings ▶ Login/Password protection ▶ Test
login
The user's Windows password must be entered in this dialog window when
enabling the option Password monitoring by Windows(see Chapter
3.2.2.2, page 83). The test login will be used to check whether the user
name matches the Windows user name.
User
Shows the current user name.
Windows password
Entry of the Windows password.
It is only if when the test login is successful that the Password monitoring
by Windows can be used.
3.2.2.4 Modifications
Tab: Configuration ▶ Extras ▶ Security settings ▶ Modifications
On the tab Modifications it can also be defined whether a modification
reason or comment must be given on the modifications to determinations.
Recommended settings