Metrohm tiBase 1.0 Manual - Manual (Page 176)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
168 ￭￭￭￭￭￭￭￭ tiBase 1.0
Grid color
Selection of the grid line color.
Selection Color selection | gray
Default value gray
Show endpoints
on | off (Default value: off)
If this check box is activated then the endpoints found will be indicated on
the curve by the symbol ♦ and labeled with EP# (potentiometric endpoints),
BP# (break point) or FP# (fixed endpoint).
Automatic EPs
Selection of the color for automatically set endpoints.
Selection Color selection | black
Default value black
Manual EPs
Selects the color for manually set endpoints.
Selection Color selection | pink
Default value pink
Background
Background color
Selection of the color for the curve background.
Selection Color selection | white
Default value white
Legend
Display of the data field, which is shown in the legend to identify the curves.
Open the dialog window Legend - Field selection for selecting the data
field.
Multiple curves of the same command
Setting, which curves are displayed when the command has been run several
times, e.g. because of a LOOP command or a multiple call of a Track.
Selection Show only last curve | Show all curves
Default value Show only last curve