Metrohm tiBase 1.0 Manual - Manual (Page 288)

4.8 Subwindow curves ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
280 ￭￭￭￭￭￭￭￭ tiBase 1.0
For DET commands
Selection
Volume [mL] | Measured value | ERC | Time [s] |
Temperature [°C] | Calculated 1...3 | External
1...3 | off
Default value off
For MET commands
Selection
Volume [mL] | Measured value | dMW | Time
[s] | Temperature [°C] | Calculated 1...3 | Exter-
nal 1...3 | off
Default value off
For SET, STAT, DOS and KFT commands
Selection
Time [s] | Measured value | Volume [mL] | dV/dt
[µL/min] | Temperature [°C] | Calculated 1...3 |
External 1...3 | off
Default value off
For KFC commands
Selection
Time [s] | Measured value | Charge [mAs] |
Amount [µg] | Drift [µg/min] | Ugen | Igen [mA]
| Calculated 1...3 | External 1...3 | off
Default value off
For BRC commands
Selection
Time [s] | Measured value | Amount [mAs] |
Water [µg] | Drift [µg/min] | Ugen | Igen [mA] |
Calculated 1...3 | External 1...3 | off
Default value off
Label
Freely definable axis label for the y1 axis. With auto the designation from
the field Size will be used.
Selection 50 characters | auto
Default value auto
Curve
Curve color
Selection of the color for the curve line.
Selection 13 colors | pink
Default value pink