Metrohm tiBase 1.0 Manual - Manual (Page 17)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 General program functions
tiBase 1.0 ￭￭￭￭￭￭￭￭ 9
Recommended settings
On the tab Login/Password protection in the dialog window Security
settings the button [Set] has to be pressed in order to set the settings. The
following conditions are therefore complied with:
￭ A login with user name and password is required each time the
program is started.
￭ Depending on the setting the password administration is carried out
in tiBase or Windows.
￭ User names must be unique. Users entered once cannot be deleted.
￭ Passwords must be unique per user. None of the expired passwords
already used once by the user may be reused.
￭ Passwords must comprise a minimum number of characters.
￭ Passwords must be changed according to a defined validity period.
￭ The number of incorrect login attempts to enter the password is
limited. If this number is exceeded, the user will automatically be set to
the status inactive.
Actions
If the login is activated, the following actions can be performed:
￭ Log in at program start
￭ Manual logout
￭ Automatic logout
￭ Change password
2.2.2 Login
Program parts: Configuration / Database
If both the options Enforce login with user name and Enforce login
with password are activated in the Security settings, the dialog window
Login will appear every time the program is started and after each time the
user logs out.
User
Entering a short name for the user.
Input 24 characters
Password
Password entry.
Input 24 characters