Metrohm tiBase 1.0 Manual - Manual (Page 285)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiBase 1.0 ￭￭￭￭￭￭￭￭ 277
For SET, STAT, DOS and KFT commands
Selection
Time [s] | Measured value | Volume [mL] | dV/dt
[µL/min] | Temperature [°C] | Calculated 1...3 |
External 1...3
Default value Volume [mL]
For KFC commands
Selection
Time [s] | Measured value | Amount [µg] |
Charge [mAs] | Drift [µg/min] | dV/dt [µ/min] |
Ugen | Igen [mA] | Calculated 1...3 | External
1...3
Default value Amount [µg]
For BRC commands
Selection
Time [s] | Measured value | Amount [µg] |
Charge [mAs] | Drift [µg/min] | dV/dt [µ/min] |
Ugen | Igen [mA] | Calculated 1...3 | External
1...3
Default value Amount [µg]
For MEAS commands
Selection
Time [s] | Measured value | dMW/dt | Tempera-
ture [°C] | Calculated 1...3 | External 1...3
Default value Measured value
Label
Freely definable axis label for the y1 axis. With auto the designation from
the field Size will be used.
Selection 50 characters | auto
Default value auto
Scaling
Start value
Initial value for scaling the y1 axis.
Only editable when autoscaling is disabled.
Range
-1.00E+12 ... +1.00E+12
Default value 0
End value
End value for scaling the y1 axis.