Metrohm tiBase 1.0 Manual - Manual (Page 93)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Configuration
tiBase 1.0 ￭￭￭￭￭￭￭￭ 85
Message by E-mail
If this check box is activated then an E-mail will be sent to the address
defined under [E-mail] as soon as the defined number of incorrect login
attempts has been exceeded.
Selection on | off
Default value off
FDA default: off
[E-mail]
This button opens the dialog window Send E-mail(see Chapter 3.2.2.7,
page 89) for defining the E-mail parameters.
Logout policies
New login only for same user
If this check box is activated then for manual logout a renewed login is
only possible for the same user. Users with administrator rights can always
log in. If this option is enabled then the subsequent option is automatically
enabled and deactivated.
Selection on | off
Default value off
FDA default: off
Note
If the automatic logout is enabled (see below) only the same user or a
user with administrator rights can log in again independent of these
option settings.
No editing of workplaces in 'BUSY' status
If this check box is activated then, after a user has logged out manually, a
newly logged-in user on the workplaces still open with running determina-
tions can neither edit data or trigger actions. Such workplaces will only be
available again when all determinations are finished. For running determi-
nations the old user name always applies (Audit Trail entries, Save, Export,
etc.). Exceptions are the stop of a determination with [Stop] and the emer-
gency stop, which are always possible for all running determinations and
series.
If this check box is deactivated then the newly logged-in user will have all
the rights for the opened workplaces that his/her group assignment author-
izes him/her to. For running determinations the new user name applies
immediately (Audit Trail entries, Save, Export, etc.).