Metrohm tiBase 1.0 Manual - Manual (Page 232)

4.5 Determination overview ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
224 ￭￭￭￭￭￭￭￭ tiBase 1.0
Formula lines can be deleted according to normal rules ([Delete]), copied
([Ctrl+C]), cut ([Ctrl+x]) and be pasted ([Ctrl+v])
Input 1000 characters
Default value empty
Unit
Unit of the result for the output (text only). The unit can be used in further
calculations as variable 'RS.Result name.UNI'.
Input 16 characters
Default value empty
Decimal places
Number of decimal places for the output of the calculated result. This para-
meter is ignored for results of the type text or date/time.
Range 0 ... 5
Default value 2
Assignment
Assign a result to a defined result column RS01 … RS25. This order specifies
in which of the 25 available result columns in the determination overview
the result is being added to. Per calculation the result columns RS01 ...
RS25 are available. Only the columns still free are made available. With
none the result will not be assigned to any column.
Range RS01 ... RS25
Default value none
Statistics
on | off (Default value: on)
If this check box is activated, the mean value and the absolute and relative
standard deviation are calculated for the result. This field is only active when
the statistics is enabled in the method of the imported determination (i.e.
the statistics can only then be disabled and enabled again, if it has already
been enabled in the method).
Description
Freely selectable description of the result.
Input 1000 characters
Default value empty