Rockwell Automation 1715-OF8I Redundant I/O System User Manual - Manual (Page 74)

74 Rockwell Automation Publication 1715-UM001C-EN-P - March 2014
Chapter 2 Installation Instructions
3. Insert an M3 nut into the base unit molding assembly as shown.
4. Secure the plug or socket assembly by inserting the two M3 socket cap
screws.
5. Tighten the screws with a 2.5 mm Allen wrench.
6. Install the cable end into the plug or socket assembly and tighten the
retaining screws by hand.
7. Fit the cable plug or socket assembly to the other I/O base unit and secure
as in steps 3 and 4 above.
8. Fit the other end of the cable into the cable plug or socket assembly.
32081-M
32081-M