Rockwell Automation 1715-OF8I Redundant I/O System User Manual - Manual (Page 154)

154 Rockwell Automation Publication 1715-UM001C-EN-P - March 2014
Chapter 5 Configure the Redundant I/O System
Step 1: Create the New Project
1. Launch the application and start a new project for the 1715 Redundant
I/O System.
2. In the application, from the File menu, choose New to open the New
Controller dialog box.
The New Controller dialog box appears.
3. In the New Controller dialog box, from the Type pull-down menu, choose
your ControlLogix controller.
4. Enter the controller Name, Chassis Type, and Slot Number to create the
new controller project.
The example above shows the 1756-L61 controller in slot 0.
5. Click OK.
Make sure to check Redundancy Enabled if this is a redundancy application.