Rockwell Automation 1715-OF8I Redundant I/O System User Manual - Manual (Page 287)

Rockwell Automation Publication 1715-UM001C-EN-P - March 2014 287
Reconfigure a Module Online Appendix D
Before the new configuration parameters are sent to the module, you must make
sure that their relationship to each other is in a format the module accepts and
that the values are within the range the module accepts, otherwise the module
can fault or the reconfiguration attempt can fail.
IMPORTANT Reconfiguring analog modules via ladder logic can be limited to functions that
involve only the changing of values. We do not recommend that enabling or
disabling features be done via ladder logic. Use the Logix Designer application
to enable or disable these features.