Remove modules – Rockwell Automation 1715-OF8I Redundant I/O System User Manual User Manual
Page 121

Rockwell Automation Publication 1715-UM001C-EN-P - March 2014
121
Installation Instructions
Chapter 2
Remove Modules
Modules can be removed online without shutting the system down or upsetting
the process in redundant configurations only. However, pulling out simplex
module impacts the process.
Modules are removed by carefully pulling them out of the base unit by using this
procedure.
1. Turn the locking screw on the front of the module 1/4 turn counter
clockwise.
The screw slot is vertical when the module is unlocked.
Unlocked Position
Turn locking screw 1/4 turn
counter clockwise until
vertical.
32084-M
This manual is related to the following products: