Rockwell Automation 1715-OF8I Redundant I/O System User Manual - Manual (Page 170)

170 Rockwell Automation Publication 1715-UM001C-EN-P - March 2014
Chapter 5 Configure the Redundant I/O System
Your project’s I/O Configuration folder now looks similar to this.
Obtaining System Status
There are two ways to access the status of the primary and secondary adapters:
• Via the Add-on Profile while online with the application
• Via the tags in the owner controller
Check Adapter Module Status While Online via the Add-on Profile
To check the status of the primary and secondary adapter modules while online,
follow these steps.
1. In the application, from the I/O Configuration Tree, right-click the 1715
adapter and choose Properties.