Important modules run only in the locked position – Rockwell Automation 1715-OF8I Redundant I/O System User Manual User Manual
Page 110
110
Rockwell Automation Publication 1715-UM001C-EN-P - March 2014
Chapter 2
Installation Instructions
The following status indicators light. This is a quick installation reference. For
more detailed status indicator information, see
Appendix A
8. Turn the locking screw on the front of the module a 1/4 turn clockwise to
lock, by using a 9 mm screwdriver.
Each module has a locking screw that secures it to its base unit. The
module has an interlock that detects when a module is locked or unlocked.
For information about the Reset button’s functionality, see
Table 14 - Start-up Sequence
1715-AENTR Adapter Module
Indicator
Status
Module Status
Steady green
Redundancy Status
Flashes, then steady green
Network Status
Off
Rack Status
Off, then steady green
Ethernet 1
Dependent on Ethernet connection status
Ethernet 2
Dependent on Ethernet connection status
IMPORTANT
Modules run only in the locked position.
1/4 Turn
To Lock Postion
Rack Status
Ethernet 1
Ethernet 2
Module Status
Redundancy Status
Network Status
1715-AENTR
ADAPTER
Reset
32083-M