Rockwell Automation 1715-OF8I Redundant I/O System User Manual - Manual (Page 62)

62 Rockwell Automation Publication 1715-UM001C-EN-P - March 2014
Chapter 2 Installation Instructions
Be sure that the mounting assembly can support the weight of the components by
using this table.
Table 8 - Component Weights
Cat. No. Component Weight g (oz)
1715-A2A Adapter base unit 283 (9.98) (1)
1715-A3IO I/O base unit 220 (7.76)
1715-AENTR Adapter module 420 (14.82)
1715-IB16D Digital input module 360 (12.70)
1715-IF16 Analog input module 360 (12,70)
1715-OB8DE Digital output module 290 (10.23)
1715-OF8I Analog output module 340 (11.99)
1715-TASIB16D Digital input simplex termination assembly 133 (4.69)
1715-TADIB16D Digital input duplex termination assembly 260 (9.17)
1715-TASIF16 Analog input simplex termination assembly 133 (4.69)
1715-TADIF16 Analog input duplex termination assembly 260 (9.17)
1715-TASOB8DE Digital output simplex termination assembly 133 (4.69)
1715-TADOB8DE Digital output duplex termination assembly 260 (9.17)
1715-TASOF8I Analog output simplex termination assembly 133 (4.69)
1715-TADOF8I Analog output duplex termination assembly 260 (9.17)
1715-N2S Short blank slot filler 40 (1.41)
1715-N2T Tall blank slot filler 50 (1.76)
Power supply User-supplied Varies
(1) All weights are approximate.