Rockwell Automation 1715-OF8I Redundant I/O System User Manual - Manual (Page 140)

140 Rockwell Automation Publication 1715-UM001C-EN-P - March 2014
Chapter 3 Digital I/O Operation
ModBFault BOOL - 0 Good, 1 fault or module not present
GroupFault BOOL - 1 if any point on either module is faulted/failed
ModAGroupFault BOOL - 1 if any point on Module A is faulted/failed
ModBGroupFault BOOL - 1 if any point on Module B is faulted/failed
PtFault INT (Radix = Binary) - 1 bit per point 0…15; 1 if point is faulted/failed on both modules
ModAPtFault INT (Radix = Binary) - 1 bit per Channel 0…15; 1 if channel has failed on module A
ModBPtFault INT (Radix = Binary) - 1 bit per Channel 0…15; 1 if channel has failed on module B
NoLoad SINT (Radix = Binary) - 1 bit per point 0…7; 1 indicates no load
ShortCircuit SINT (Radix = Binary) - 1 bit per point 0…7; 1 indicates short circuit
Tag Description