Rockwell Automation 1715-OF8I Redundant I/O System User Manual - Manual (Page 181)

Rockwell Automation Publication 1715-UM001C-EN-P - March 2014 181
Configure the Redundant I/O System Chapter 5
Your project’s I/O configuration folder now looks similar to this.
Add a1715-OB8DE Digital
Output Module to the Project
In this section, you do the following:
• Add a 1715-OB8DE digital output module in Duplex mode to the
project.
• Add a 1715-OB8DE digital output module in Simplex mode to the
project.
Step 1: Add a 1715-OB8DE Digital Output Module in Duplex Mode
1. To add a new 1715-OB8DE digital output module in Duplex mode to the
project, right-click the 1715-AENTR adapter module and choose New
Module.
The Select Module dialog box appears.
2. Expand the Digital module list and select the 1715-OB8DE module, and
click OK.