Rockwell Automation 198x Modular DeviceNet Starter Auxiliary I/O - Manual (Page 81)

Specifications 5-15
Publication 198-UM001B-EN-P September 2001
Table 5.J 198-IB4S Specifications
Terminal Block (3.5 mm Pitch 8-Position)
Connection Capacity
Solid wire 0.13…1.5 mm 2 (24…16 AWG)
Flexible wires 0.13…2.5 mm
2
(24…14 AWG)
Flexible wires with ferrules
0.5…2.5 mm
2
(20…14 AWG)
Plastic collar 1.5 mm
2
(16 AWG)
Wire Type Use 75 C copper wire min.
Tightening Torque Spring clamp
Electrical
Module Operating Voltage Range 11…25V DC
Module Voltage Rating 24V DC
Module Current Draw 21 mA with no inputs on 24V DC
51 mA with all inputs on 24V DC
Input Voltage Rating 24V DC
Input On-State Voltage Range 10…26V DC
Input On-State Current 3.0 mA @ 10V DC
7.2 mA @ 24V DC
Input Off-State Voltage Range 0…5V DC
Input Off-State Current <1.5 mA
Module Isolation 132V AC working voltage
1500V AC for 1 s
Input Filter — Software
Selectable (with two I/O modules) Off to On 1, 2, 4, 8, 16 ms
On to Off 1.3, 2, 4, 8, 16 ms
Input Compatibility IEC 1+
Environmental
Ambient Temperature Operating –25…+60 °C (–4…+140°F)
Storage –40…+85 °C (–40…+185°F)
Relative Humidity 0…95% non-condensing
Shock Operating 30 g peak acceleration
Non-Operating 50 g peak acceleration
Operating Vibration 10 g @ 58…2000 Hz
0.060 in. peak-to-peak displacement 2…57 Hz
Per IEC 68-2-6
Approvals
Agency Certification
(when product is marked) cUL
UL Listed
CE marked for all applicable directives