Rockwell Automation 198x Modular DeviceNet Starter Auxiliary I/O - Manual (Page 132)

5-66 Specifications
Publication 198-UM001B-EN-P September 2001
Table 5.AH 198-IB2XOB2S-Q5 Specifications
Terminal Block (2.54 mm Pitch 10-Position)
Connection Capacity
Solid wire 0.13…0.5 mm 2 (28…20 AWG)
Flexible wires 0.13…0.5 mm
2
(28…20 AWG)
Flexible wires with ferrules 0.25…0.5 mm
2
(20 AWG)
Plastic collar 0.25…0.5 mm
2
(20 AWG)
Wire Type Use 75 C copper wire min.
Tightening Torque Spring clamp
Electrical
Module Operating Voltage Range 11…25V DC
Module Voltage Rating 24V DC
Module Current Draw 71 mA @ 24V DC
Input Voltage Rating 24V DC (sourced from module)
Input On-State Voltage Range 10…26V DC
Input On-State Current 3.0 mA @ 10V DC
7.2 mA @ 26V DC
Input Off-State Voltage Range 0…5V DC
Input Off-State Current <1.5 mA
Input Filter — Software
Selectable (with two I/O modules) Off to On 1, 2, 4, 8, 16 ms
On to Off 1.3, 2, 4, 8, 16 ms
Input Compatibility IEC 1+
Output Voltage Rating 24V DC
Output Load Current 5 mA per output
Switching Device Solid-State
Module Isolation 132V AC working Voltage
1500V AC for 1 min.
Environmental
Ambient Temperature Operating –25…+60 °C (–4…+140°F)
Storage –40…+85 °C (–40…+185°F)
Relative Humidity 0…95% non-condensing
Shock Operating 30 g peak acceleration
Non-Operating 50 g peak acceleration
Operating Vibration 10 g @ 58…2000 Hz
0.060 in. peak-to-peak displacement 2…57 Hz
Per IEC 68-2-6
Approvals
Agency Certification
(when product is marked) cUL, UL Listed
CE marked for all applicable directives