Rockwell Automation 198x Modular DeviceNet Starter Auxiliary I/O - Manual (Page 156)

A-16 DeviceNet Information
Publication 198-UM001B-EN-P September 2001
Error Code
The following table describes the error codes.
Connection Object — Class ID (05hex)
Five instances of the Connection Object are supported. Instance 1 is the explicit message
connection. Instance 2 is the polled I/O connection. Instance 4 is the COS I/O connection.
Instances 5 and 6 are available for the UCMM. The following Instance 1 (explicit message
connection) attributes are supported. Refer to the DeviceNet Specification for more
information.
Table A.21 Error Code
Location No. — Bit I/O Module
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 No Error
0 0 0 0 0 0 0 1 Module Added
0 0 0 0 0 0 1 0 Module Removed
0 0 0 0 0 0 1 1 Module Different
0 0 0 0 0 1 0 0 Invalid ID
0 0 0 0 0 1 0 1 Invalid Module Configuration
0 0 0 0 0 1 1 0 Too Many Modules
0 0 0 0 0 1 1 1 CSum Error Count > 500
0 0 0 0 1 0 0 0 Unused
0 0 0 0 1 0 0 1 EEprom Failure
0 0 0 0 1 0 1 0 Unable to Power Bus
0 0 0 0 1 0 1 1 Sensoror Valve Voltage Error
0 0 0 0 1 1 0 0 Overcurrent
0 0 0 0 1 1 0 1 Short-Term Overtemp
0 0 0 0 1 1 1 0 Long-Term Overtemp