MacDon M100 SP Operators Manual - Manual (Page 66)

OPERATOR’S STATION
169304
64
Rev. C
k. Connect safety chain (G) through the slot (H) in
drawbar support and securely attach the hook
(J) to the chain. Leave enough slack to allow the
hitch to pivot.
l. At the drawbar, connect the tow-bar harness
plug (K) to the receptacle on the windrower.
m. At the LH float spring tower, attach connector (L)
on windrower harness to towing harness
receptacle (M).
n. Confirm that the flashing amber and signal lights
on header function properly.
o. Before moving the machine: double check that
all pins are secure, the drawbar and hitching
components are not showing signs of damage,
and that all safety equipment is installed and
fully functional.
K
L
M
G
H
J