MacDon M100 SP Operators Manual - Manual (Page 46)

OPERATOR’S STATION
169304
44
Rev. C
5.18.6 Engine Error Codes
The CDM displays “Error Codes” when there is a fault with one of the several sensors that monitor and control
engine operation, to assist the operator or technician in locating a specific problem with engine operation.
Refer to the Appendix for the “Error Codes”.
5.18.7 CDM & WCM Fault Codes
The CDM displays “Fault Codes” when there is a fault with one of the several sensors that monitor and control
windrower operation, to assist the operator or technician in locating a specific problem with the windrower.
Refer to the Appendix for the “Fault Codes”.