Operator’s station, 15 engine controls/gauges – MacDon M100 SP Operators Manual User Manual

Page 27

Text mode
Original mode

OPERATOR’S STATION

169304

Rev. C

5.15 ENGINE CONTROLS/GAUGES

All engine controls are conveniently located on
the operator’s console. Refer to the following
illustration for the location and a description of
each.

THROTTLE

Controls Engine RPM.

FULL – Push Lever Forward
OPERATING – See Section 6.3.5
IDLE – Pull Lever Back

IGNITION SWITCH

ACC – Fully Counter-Clockwise
OFF – All Electrical Systems Off
RUN – Clockwise
START– Fully Clockwise To Crank Engine
Release and Switch Returns to RUN

REMOVE KEY WHEN WINDROWER NOT IN USE.

KEY ALSO LOCKS DOORS.

FULL

IDLE