MacDon M100 SP Operators Manual - Manual (Page 111)

MAINTENANCE/SERVICE
169304
109
Rev. C
PROBLEM CHECK
ITEM
NO.
Steering wheel will not lock in neutral. GSL Position 7.7.3.3
Cable Tension 7.7.3.4
Neutral Lock 7.7.3.5
Neutral Start Switch 7.7.3.6
Ground speed lever will not go into reverse or forward. Cable Tension 7.7.3.4
Ground speed lever rattles in neutral Cable Tension 7.7.3.4
Neutral Lock 7.7.3.5
Ground speed lever not spring loaded towards the center of forward travel slot Cable Tension 7.7.3.4
Neutral Lock 7.7.3.5
Steering wheel locks in neutral, but neutral start switch does not compress Neutral Start Switch 7.7.3.6
Neutral Lock Adjust Bolts 7.7.3.7
Cable Tension 7.7.3.4
GSL Position 7.7.3.3
Neutral Lock 7.7.3.5
Perform Neutral Set-up
Procedure.
7.7.4
Machine "growls" severely or moves after engine start-up. Neutral Start Switch 7.7.3.6
Neutral Lock Adjust Bolts 7.7.3.7
Cable Tension 7.7.3.4
GSL Fore-Aft Movement 7.7.3.1
GSL Position 7.7.3.3
Neutral Lock 7.7.3.5
Loose Hardware 7.7.3.8
Perform Neutral Set-up
Procedure.
7.7.4
Steering wheel locks in neutral only after several left to right rotations of wheel Neutral Lock Adjust Bolts 7.7.3.7
Cable Tension 7.7.3.4
GSL Position 7.7.3.3
Neutral Lock 7.7.3.5
Perform Neutral Set-up
Procedure.
7.7.4