MacDon M100 SP Operators Manual - Manual (Page 17)

SPECIFICATIONS
169304
15
Rev. C
HEADER LIFT/TILT
Type Hydraulic
Gear Pump
Displacement 1.02 cu.in. (16.7 cc)
Flow 11.5 U.S. gpm (46.5 L/min)
System Pressure (Relief/Max) 2500 psi (17.24 MPa)
Header Tilt
Mechanically Adjustable Link (Optional Hydraulic Cylinder Adjustable From
Cab)
HEADER FLOTATION
Adjustable Springs Manual, External, Draw-Bolt With Springs (1 per side)
CAB
Dimensions
Width 63 in. (1600 mm)
Depth 68.3 in. (1735 mm) (at top of window)
Height 64.6 in. (1640 mm)
Volume 125 cu.ft. (3540 liters)
Seat
Driver Mechanical Suspension, Seat Belt
Training
(Optional)
Folding, Cab Mounted, Seat Belt
Windshield Wiper Front 31.5 in. (800 mm) Blade
Heater 24,000 Btu/h (7038 W)
Air Conditioning 28,280 Btu/h (8288 W)
Electrical Outlets One Live, One On Ignition, One Live/Keyed.
Mirrors Two Outside
Radio
Two Speakers and Antenna Factory Installed.
Dealer Installed Radio
SYSTEM MONITORING
Speeds
Ground (mph or km/h), Engine (rpm), Knife (spm) Optional, Reel (rpm)
Optional, Conveyor (Ref. No.)
Header Height, Angle (Optional)
TIRE OPTIONS
Size
Drive 18.4 - 26 Bar, 18.4 - 26 Turf, 600-65 R28 Bar, 23.1 - 26 Turf, 580-70 R26 Turf
Rear
7.5 – 16SL Single Rib Formed Caster, 10 x 16 Formed/Forked Caster
16.5L – 16.1 Rib Implement Flotation, Forked Caster
Pressure Drive Bar – 32 psi (221 kPa), Turf – 20 psi (138 kPa)
Rear 10 psi (69 kPa)
FRAME AND STRUCTURE
Dimensions Refer to Section 4.1, Windrower Dimensions
Frame to Ground (Crop Clearance) 45.7 in. (1160 mm)
Weight Approx. 9900 lb (4491 kg)
NG Header Compatibility
SK A30S Auger, D50 & D60S Harvest Header (35’ Max.)
DK A30D, A40D Auger, D60D Harvest Header (35’ Max.)
NOTES: 1. Specifications and design are subject to change without notice or obligation to revise previously
sold units.
2. Weights do not include options.