MacDon M100 SP Operators Manual - Manual (Page 30)

OPERATOR’S STATION
169304
28
Rev. C
5.17.2.1 Display Selector Switch
Selects and displays the settings in the CDM (B)
top line read-out for each of the header controls.
• Press switch to scroll through settings.
5.17.2.2 Reel Position Switches
NOTE
Reel position switches work only on
draper headers.
Press and hold switch at location shown to move
reel.
Release switch at desired position.
5.17.2.3 Header Position Switches
Press and hold switch at location shown to move
header.
Release switch at desired position.
5.17.2.4 Reel Speed Switches
Press and hold switch at location shown to
change reel speed.
Release switch at desired speed.
NOTE
Auger speed adjusts proportionately when
reel speed is changed. See Section 6 for
further details.
DISPLAY
SELECTOR
B
REEL UP
REEL AFT
REEL FORWARD
REEL DOWN
HEADER
TILT UP
HEADER DOWN
HEADER
TILT DOWN
HEADER UP
SLOW
FAST