MacDon M100 SP Operators Manual - Manual (Page 124)

MAINTENANCE/SERVICE
169304
122
Rev. C
q. Position end cap onto filter housing with
vacuator valve pointing approximately down.
r. Rotate end cap clockwise until it stops.
s. Slide yellow locking tab (H) to lock end cap in
place.
t. Close engine compartment hood.
57.6.4.3 Charge Air Cooling
After the intake air passes through the air filter, it
passes through the turbocharger which boosts
the pressure. This process heats the air so it is
passed through a cooler before entering the
engine intake. The cooler is located in the
cooling box behind the radiator and should be
cleaned daily with compressed air. Refer to
Section 7.9.2, Cooling Box Maintenance.
H