MacDon M100 SP Operators Manual - Manual (Page 16)

SPECIFICATIONS
169304
14
Rev. C
4.2 SPECIFICATIONS
ENGINE
Type Cummins QSB-3.3 4 Cyl. Turbo
Displacement 200 cu. in. (3.3liters)
Power
Rated 99 hp (74 kW) @ 2600 rpm
Peak 99 hp (74 kW) @ 2000 rpm
Maximum RPM (no load) 2630-2650
Idle RPM 1100
ELECTRICAL SYSTEM
Recommended Battery
Group Rating 31A. Max Dim – 13L.x6.81W.x9.43H. in. (330x173x240 mm).
12 Volt, Min. 950CCA Heavy Duty/Off Road/Vibration Resistant.
Alternator 120 amp
Starter Dry Type
Working Lights 11
TRACTION DRIVE
Type Hydrostatic, 2 Speed Electric Shift
Speed
Field Lo Range 0-11 mph (17.7 km/h)
Reverse 6 mph (9.6 km/h)
Transport High Range 0-16 mph (25.6 km/h)
Transmission
Type 2 Piston Pumps – 1 per Drive Wheel.
Displacement 3.0 cu.in. (49 cc)
Flow 33 U.S. gpm (129 L/min)
Final Drive
Type Planetary Gearbox
Ratio 41.42 : 1
Wheel Motor Displ.
Lo Range 2.8 cu.in. (46 cc)
Hi Range 1.7 cu.in. (27 cc)
SYSTEM CAPACITIES
Fuel Tank 97 U.S. Gallons (378 liters)
Cooling 5.1 U.S. Gallons (20 liters)
Hydraulic Reservoir 11.5 U.S. Gallons (45 liters)
Crankcase 1.9 U.S. Gallons (7 liters)
HEADER DRIVE
Type Displacement Flow Max. Press.
Knife Drive – Pump A (Mechanically Adjustable) Piston
3.0 cu.in.
(0-49 cc)
0-30 U.S. gpm (117
L/min)
4000 psi
(27579 kPa)
Reel Drive – Pump B
Gear
1.02 cu.in.
(16.7 cc)
0-11.5 U.S. gpm (45
L/min) @ 2600 rpm
2600 psi
(17926 kPa)
Conveyor – Pump C
(continued next page)