MacDon M100 SP Operators Manual - Manual (Page 148)

MAINTENANCE/SERVICE
169304
146
Rev. C
d. Pinch the wire retainer (E) and lift away from
hooks.
e. Remove bulb (F) from body and pull wire from
connector (G).
IMPORTANT
Do not touch the glass of the halogen bulb
as the oils or other chemicals from your
skin will cause the bulb to fail prematurely.
f. Match slots on new bulb (F) with lugs (H) in
optical unit and insert bulb into unit.
g. Secure bulb with wire retainer (E).
h. Push wire into connector (G).
i. Position light into light receptacle, ensuring top
is up, and secure with bezel (D) and screws (C).
57.8.5 Swath Lights
DANGER
Stop engine and remove key from ignition
before leaving operator's seat for any
reason. A child or even a pet could engage
an idling machine.
The swath lights are not adjustable. Replace
bulbs as follows:
a. Remove the two screws (A) and remove light
bezel (B).
b. Remove light from receptacle.
(continued next page)
C
D
G
H
E
F
A
B