MacDon M100 SP Operators Manual - Manual (Page 150)

MAINTENANCE/SERVICE
169304
148
Rev. C
57.8.5.2 Amber Lights
a. Shutdown engine and remove the key. Turn off
the lights.
NOTE
Hold onto the hand-holds (A) on the cab
front corners and stand on the header
anti-slip strips or stand on the
maintenance platform when accessing the
amber lights.
b. Remove two screws (B) from lens and remove
lens.
c. Push and twist light bulb to remove from socket.
d. Install new bulb ensuring that bulb base is
properly engaged in socket. Use Bulb Trade
#1156.
e. Reinstall lens with screws (B).
57.8.5.3 Dome Light
a. Shutdown
engine.
b. Remove two screws (C) from plastic lens and
remove lens.
c. Replace bulb.
d. Reinstall plastic lens with screws (C).
57.8.6 Ambient Light
a. Shutdown engine.
b. Push against tabs (D) with a screwdriver and
pull ambient light fixture out of cab roof.
c. Remove connectors (E).
d. Connect wires to new light fixture.
e. Push into place in cab roof until tabs hold fixture
in place.
57.8.7 Turn Signal Indicators
If the turn signal indicators on the CDM do not
function, contact your Windrower dealer.
C
A
B
D
E
D