Lenze i700 Manual - Manual (Page 50)

Technical data
Terminal description
Axis modules
4
l
50 EDS700ACBA EN 4.0
Integrated safety engineering
X1 Labelling Description
SIA Safe input, channel A On double axis devices, there are
two of these connections. For the
assignment to the axes, the
designations "A" / "B" are used.
Independently of this, the
two−channel safe input is always
provided with the channels A
and B.
GS Reference potential GND
SIB Safe input, channel B
i700P00x
Terminal data
Conductor cross−section Tightening torque !
[mm 2 ] [AWG] [Nm] [lb−in]
flexible 0.2 ... 2.5 24 ... 12 − − 3.5 x 0.6
X1 Electrical data
SIA
SIB
GS Rated voltage 24 V in accordance with
IEC 61131−2
Observe detailed
information on
functional safety
(
^ 126).
Voltage range 19.2 ... 28.8 V
Residual ripple Max. ± 5 %
Current consumption 15 mA
Polarity reversal
protection When polarity is reversed: no function and no
destruction.
,
Further information on the use of this connection can be found ...
ƒ in the chapter "Safety engineering" if the "STO" safety function is to be used
(
¶ 126).
ƒ in the chapter "Electrical installation" if safety functions will not be used
(
¶ 105).