Lenze i700 Manual - Manual (Page 24)

Product description
Product key
3
l
24 EDS700ACBA EN 4.0
3.4 Product key
1 ... 4 5 6 7 8 9 ... 11 12 13 14 15 16, 17 18
Power supply E70A C P S x xxx 4 x
Servo inverter E70A C M S x xxx 4 x x x xx x
Product series
Servo inverter i700
Mounting type
C = control cabinet
Design
M = axis module (servo inverter)
P = power supply module
Version
S = standard
Mounting type
E = built−in technique
D = push−through technique
C = cold plate technique
Output current e.g.
005 = 5 A
060 = 60 A
Voltage class
4 = 400/480 V, 3/PE AC
Ambient conditions
S = standard industrial environment IE33 according to IEC 60721−3−3
V = rough environment (coated printed circuit boards)
Safety system
A = with drive−based safety "safe torque off (STO)"
Number of axes
1 = single axis module (single inverter)
2 = double axis module (double inverter)
Communication
ET = EtherCAT®
Sensor type
R = resolver
E = SinCos encoder
The nameplate serves to identify delivered products by nameplate data. The product catalogue provides
information on the possible configuration to order the products.
I
Tip!
Depending on the topic, the type designation parts important for the
identification are underlined (e.g. E70ACMSD0054Sx1xxx).