Lenze i700 Manual - Manual (Page 140)

Accessories (overview)
RFI filter/mains filter
11
l
140 EDS700ACBA EN 4.0
11.3 RFI filter/mains filter
Advantages by the use of filters:
ƒ Compliance with EMC requirements
ƒ Reduction of the current load
ƒ Positive effects on the service life of the controllers possible
– Strong reliability
– Reduction of the failure rate
ƒ Operation on 30 mA residual−current circuit breakers for device sizes 1 ... 3 (up to
24 A/11 kW) is enabled.
Mains filters:
Mains filters reduce the conducted interference emission into the mains for compliance
with the requirements acc. to EN 61800−3. Mains filters are a combination of mains choke
and RFI filter in one housing.
Voltage Freq. Current [A] Current [A] Number of
phases
[V] [Hz]  max. +45° C  max. +55° C
E94AZMP0084 400/480 50/60 8/8 6/6 3
E94AZMP0294 400/480 50/60 29/29 21.8/21.8 3
E94AZMP0824 400/480 50/60 82/82 61/61 3
 Temperature in the control cabinet
RFI filters:
RFI filters are capacitive accessories for compliance with the requirements acc. to
EN 61800−3 for conducted interference emission. RFI filters can be directly connected
upstream of the power supply modules. RFI filters are also called EMC filters.
Voltage Freq. Current [A] Current [A] Number of
phases
[V] [Hz]  max. +45° C  max. +55° C
E94AZRP0084 400/480 50/60 8/8 6/6 3
E94AZRP0294 400/480 50/60 29/29 21.8/21.8 3
E94AZRP0824 400/480 50/60 82/82 61/61 3
 Temperature in the control cabinet