Technical data, Rated data supply modules, Output data – Lenze i700 Manual User Manual
Page 33
Technical data
Rated data
Supply modules
l
33
EDS700ACBA EN 4.0
Output data
Voltage
Frequency
Continuous output
current [A]
Number
of
phases
Continuous output
power [kW]
up to +40 °C
[V]
[Hz]
up to +40
°C
up to +55
°C
Without
With
Mains choke/filter
E70ACPSx0304x
565
DC
30.0
18.8
2
10.3
15.4
E70ACPSx0304x
675
DC
30.0
18.8
2
12.3
18.5
E70ACPSx0604x
565
DC
60.0
37.5
2
20.6
30.9
E70ACPSx0604x
675
DC
60.0
37.5
2
24.6
37.0
Temperature in the control cabinet
Chapter 4.3 contains data for overcurrent operation.
The i700 device series is designed for dynamic applications with several drives (DC−bus
operation, (
¶ 108)).
Usually an acceleration process is followed by a deceleration process, and the motor
speeds rarely reach the rated motor speed. Even if a drive is operated at rated power (rated
current, rated speed), there are other drives in the network requiring less power.
Therefore, in this case, a power supply module can be dimensioned much smaller than
would be required by the total power of the axis controllers.
Power losses
Power loss P
V
[W]
U
Lr
= 400 V
U
Lr
= 480 V
when controller is inhibited
E70ACPSx0304x
60
60
−
E70ACPSx0304x
+ EZAELN3025B122
80
80
−
E70ACPSx0604x
110
110
−
E70ACPSx0604x
+ EZAELN3050B591
160
160
−
E70ACPSx0304x
60
60
10
E70ACPSx0604x
110
110
10