Features, Layer 1 features, X330w-2ds1 – Avaya X330WAN User Manual
Page 24: X330w-2usp, Layer 2 features, X330w-2ds1 x330w-2usp, Figure 1.1, X330w-2usp and x330w-2ds1 modules
Chapter 1
Introduction
2
Avaya X330WAN User’s Guide
Figure 1.1
X330W-2USP and X330W-2DS1 Modules
Features
The following is a description of X330W-2DS1 and X330W-2USP features:
Layer 1 Features
X330W-2DS1
•
2 channelized/fractional E1/T1 ports, with RJ-48 connectors.
•
10/100Base-T Auto-Negotiation Fast Ethernet port.
•
100 Mbps, Full Duplex FabricFastEthernet interface, for internal connection to
the P330 switch.
•
RS-232, RJ-45 port for Console and dial-in modem connection.
X330W-2USP
•
2 USP ports with standard SCSI connectors, supporting V.35, X.21, and
EIA530A protocols.
•
Supports DTE serial connections up to 8 Mbps.
•
10/100Base-T Auto-Negotiation Fast Ethernet port.
•
100 Mbps, Full Duplex FabricFastEthernet interface, for internal connection to
the P330 switch.
•
RS-232 RJ-45 port for Console and dial-in modem connection.
Layer 2 Features
•
PPP over channeled and fractional E1/T1. X330WAN has the ability to map
several PPP sessions to a single E1/T1 interface.
•
PPP over USP.
•
Unframed E1 for enabling full 2.048 Mbps bandwidth usage.