Avaya X330WAN - Manual (Page 165)

Frame Relay Configuration CLI Commands
Avaya X330WAN User’s Guide 143
fragment (Map-class context)
Use the fragment command to set the fragment size. If you do not enter a value, the
default value is used. The no form of this command restores the default value.
Syntax
[no] fragment
Parameters
Example
X330WAN-2USP-1(super-map-class)# fragment 35
frame-relay class-dlci (Serial sub-interface context)
Use the frame-relay class-dlci command to define a map-class to a DLCI on a
sub-interface. The no form of this command deletes the map-class of a DLCI on the
sub-interface.
Syntax
[no] frame-relay class-dlci
Parameters
Example
X330W-2USP-1(super-if:Serial2.1)# frame-relay class-dlci 16 voip
frame-relay interface-dlci (Serial sub-interface context)
Use the frame-relay interface-dlci command to define the Primary DLCI on a
sub-interface. The no form of this command deletes the Primary DLCI on the
sub-interface.
Syntax
[no] frame-relay interface-dlci
value The fragment size in bytes. The default is 88 bytes.
DLCI number The DLCI number to assign a map-class, an integer from 16 to
1007.
map-class-name The DLCI map-class name, a string of characters.