General: device commands, Banner login, Banner post-login – Avaya X330WAN User Manual
Page 111: Banner login banner post-login
General: Device Commands
Avaya X330WAN User’s Guide
89
N
is the number of the device in a stack of WAN devices,
n
is the number of the
WAN port (1 or 2),
Z
is the interface number, and
x
is the number of the channel
group.
General: Device Commands
This section contains a list of all general device CLI commands.
banner login
Use the
banner login
command to enter the
login banner
configuration mode.
The
no
form of this command sets the login banner to the default.
Note:
Before creating a new banner, delete the current banner using the
no banner
login
command.
Syntax
[no] banner login
Example
X330WAN-2USP-1(super)# banner login
banner post-login
Use the
banner post-login
command to enter the
post-login
configuration
mode. The
no
form of this command sets the post-login banner to the default.
Note:
Before creating a new banner, delete the current banner using the
no banner
post-login
command.
Syntax
[no] banner post-login
Example
X330WAN-2DS1-1(super)# banner post-login
• Interface Serial
X330WAN-2DS1-N(config-
if:Serialn:x)#
X330WAN-2USP-N(config-
if:Serialn)#
Table 6.1
X330WAN-2DS1 CLI Prompts (Continued)