Fragment size, Fragment timeout, Fragment size fragment timeout – Avaya X330WAN User Manual
Page 191
Layer 3 CLI Commands
Avaya X330WAN User’s Guide
169
fragment size
Use the
fragment size
command to set the maximum number of fragmented IP
packets, destined to the router, to reassemble at any given time. The
no
form of this
command sets the fragment size to the default value (100).
Note:
No IP reassembly is performed on packets in transit through the router.
Syntax
[no] fragment size
Parameters
Example
X330WAN-2DS1-1(configure)# fragment size 150
fragment timeout
Use the
fragment timeout
command to set the maximum number of seconds to
reassemble a fragmented IP packet destined to the router. The
no
form of this
command sets the fragment timeout to the default value (10).
Note:
No IP reassembly of packets in transit through the router is performed.
Syntax
[no] fragment timeout
Parameters
Example
X330WAN-2DS1-1(configure)# fragment timeout 30
database-limit
The maximum number of packets undergoing re-assembly at
any given time, from 0 to 200. The default is 100.
timeout
The maximum number of seconds to re-assemble an IP packet, from 5
to 120. The default is 10.