Avaya X330WAN - Manual (Page 189)

Layer 3 CLI Commands
Avaya X330WAN User’s Guide 167
default-metric (Router-OSPF context)
Use the default-metric command to set the default metric of redistributed
routes. The no form of this command restores the default. The default metric is 20.
Syntax
[no] default-metric
Parameters
Example
X330WAN-2DS1-1(configure router:ospf)# default-metric 50
default-metric (Router-RIP Mode)
Use the default-metric command to set the default metric of redistributed
routes. The no form of this command restores the default. The default metric is 1.
Syntax
[no] default-metric
Parameters
Example
X330WAN-2DS1-1(configure router:rip)# default-metric 5
distribution-list (Router-RIP Mode)
Use the distribution-list command to filter incoming/outgoing networks in
route updates. The
no form of this command deactivates the filter.
Syntax
[no] distribution-list [
type>|]
default metric An integer from 1 to 65535.
default metric The interface RIP route metric value. The range is 1 to 16.