Avaya X330WAN - Manual (Page 226)

Chapter 6 X330WAN CLI Commands
204 Avaya X330WAN User’s Guide
show ip route static
Use the show ip route static command to display the static routes.
Syntax
show ip route static [ [] ]
Parameters
Example
Output Example
Router-1 (super)# show ip route static
X330WAN-2DS1-1(super router:ospf)# show ip route static
Showing 1 rows
Network Mask Interface Next-Hop Cost Pref Perm Active
------- ---- ---------- ----------- ---- ---- ---- -------
0.0.0.0 0 FastEth 1 149.49.75.1 1 low No Yes
where Pref is the preference, and Perm is Permanent.
show ip route summary
Use the show ip route summary command to display the number of routes
known to the device.
Syntax
show ip route summary
Example
X330WAN-2DS1-1(super router:ospf)# show ip route summary
X330WAN-2DS1-1(super)# show ip route summary
Route Source Networks Subnets
---------------- ---------------- ----------------
Local 0 1
Static 0 1
Total 0 2
ip-addr The IP address of the routes.
mask The IP mask of the routes.
show ip route static
show ip route static 137.32.50.13
show ip route static 137.44.50.13 255.255.255.0
Display all static routes.
Display a single static route.
Display a range of static
routes.