Ip vrrp timer, Network (router-ospf context), Ip vrrp timer network (router-ospf context) – Avaya X330WAN User Manual
Page 213
Layer 3 CLI Commands
Avaya X330WAN User’s Guide
191
ip vrrp timer
Use the ip vrrp timer command to set the virtual router advertisement timer
value (in seconds) for the virtual router ID. The
no
form of this command restores
the default value.
Syntax
[no] ip vrrp
Parameters
Example
To set the virtual router advertisement timer value for virtual router 3 to 2:
X330WAN-2DS1-1(configure)# ip vrrp 3 timer 2
network (Router-OSPF context)
Use the
network
command to enable OSPF in this network. The no form of this
command disables OSPF in this network. The default is disabled.
Syntax
network
Parameters
Example
X330WAN-2DS1-1(configure router:ospf)# network 192.168.0.0
X330WAN-2DS1-1(configure router:ospf)# network 192.168.0.0
0.0.255.255 area 0.0.0.0
vr-id
Virtual Router ID (1-255).
value
The advertisement transmit time (seconds). The range is from 1 to 255.
net addr
IP address.
wildcard-mask
Wildcard mask address.
area id
Area ID. This parameter exists for compatibility with the P550.