Avaya X330WAN - Manual (Page 116)

Chapter 6 X330WAN CLI Commands
94 Avaya X330WAN User’s Guide
Output Fields
1 X330WAN-A 3.9.10 SW Component Flash Bank A Software Image -
Bank A
1 X330WAN-B 3.12.10 SW RT Image Flash Bank B Software Image -
Bank B
1 P3WAN 3.12.3 SW Web Image Nv-Ram EmWeb application
1 X330WAN-Booter 3.12.1 SW BootImage Nv-Ram Booter Image
Field Description
M# The device number.
file There are several files loaded into the device’s memory:
• Startup-config
- The file that contains the configuration used
in the reboot process.
• Running-config – The file that contains the configuration
currently in use and the startup configuration.
• X330WAN-A Image - Bank A – File that contains the previous
firmware version download for redundancy.
• X330WAN-B Image - Bank B – File that contains the firmware
version download.
• P3WAN – File that contains the Device Manager (Embedded
Web) software.
• X330WAN-Booter Image - File that contains the booter
version.
ver num S/W Version number – Relevant only for the Device
Management software.
file type There are several file types:
• Startup-config
- The configuration used in the reboot process.
• Running Conf – The configuration currently in use and the
startup configuration.
• SW Component - The firmware version used when booting
from bank A.
• SW RT Image - The firmware version used as a default.
• SW Web Image – Device Manager software archive file.
• SW BootImage - The booter software image.
file location Type of internal memory into which the file is loaded.
file description Description of the file.