Avaya Wireless AP-3 User Manual
Avaya Hardware
Table of contents
Document Outline
- Avaya Wireless AP-3 User's Guide
- Contents
- Introduction
- Getting Started
- Status Information
- Advanced Configuration
- In This Chapter
- Configuring the AP Using the HTTP Interface
- System
- Network
- Interfaces
- Management
- Filtering
- Ethernet Protocol
- Static MAC
- Example
- Creating an Entry
- Static MAC Filter Examples
- Prevent Two Specific Devices from Communicating
- Prevent Multiple Wireless Devices From Communicating With a Single Wired Device
- Prevent All Wireless Devices From Communicating With a Single Wired Device
- Prevent A Wireless Device From Communicating With the Wired Network
- Prevent Messages Destined for a Specific Multicast Group from Being Forwarded to the Wireless LAN
- Advanced
- TCP/UDP Port
- Alarms
- Bridge
- Security
- RADIUS
- VLAN/SSID
- Monitor Information
- Commands
- Troubleshooting
- In This Chapter
- Troubleshooting Concepts
- Symptoms and Solutions
- Recovery Procedures
- Related Applications
- Command Line Interface (CLI)
- In This Appendix
- General Notes
- Command Line Interface (CLI) Variations
- CLI Command Types
- Using Tables & User Strings
- Configuring the AP using CLI commands
- Set Basic Configuration Parameters
- Other Network Settings
- Configure the AP as a DHCP Server
- Configure the DNS Client
- Maintain Client Connections using Link Integrity
- Change your Wireless Interface Settings
- Operational Mode (802.11b/g)
- Autochannel Select (ACS)
- [Device Name]>set wif
autochannel [Device Name]>reboot 0 - Enable/Disable Closed System
- Enable/Disable Interference Robustness (802.11b Only)
- Enable/Disable Load Balancing (802.11b Only)
- Enable/Disable Medium Density Distribution (802.11b Only)
- Set the Distance Between APs (802.11b Only)
- Set the Multicast Rate (802.11b Only)
- Set Ethernet Speed and Transmission Mode
- Set Interface Management Services
- Configure Syslog
- Configure Intra BSS
- Configure MAC Access Control
- Configure Authentication Mode
- Set RADIUS Parameters
- Set VLAN/SSID Parameters
- CLI Monitoring Parameters
- Parameter Tables
- ASCII Character Chart
- Specifications
- Technical Support