Avaya X330WAN - Manual (Page 131)

General: Device Commands
Avaya X330WAN User’s Guide 109
show timezone
Use the show timezone command to display the current device timezone.
Syntax
show timezone
Example
X330WAN-2DS1-1(super)# show timezone
Timezone set to 'GMT', offset from UTC is 0 hours
sync time
Use the sync time command to synchronize the time.
Syntax
sync time
Example
X330WAN-2DS1-1(super)# sync time
Time has been distributed.
tech
Use the tech command to enter tech mode. This command is reserved for service
personnel use only.
terminal length
Use the terminal length command to set the length of the terminal display in
characters.
Syntax
terminal length []
Parameters
Example
X330WAN-2DS1-1(super)# terminal length 24
screen-length none - Displays the current length.
number - Sets the new screen length to the value.