Avaya X330WAN - Manual (Page 153)

Interface Serial CLI Commands
Avaya X330WAN User’s Guide 131
clear ip tcp header-compression (PPP interface)
Use the clear ip tcp header-compression command to clear TCP compression
statistics either for all enabled interfaces or for a specific interface. To clear for all
enabled interfaces, do not enter an interface type and number.
Syntax
clear ip tcp header-compression [ ]
Parameters
Example
X330WAN-2USP-1(super)# clear ip tcp header-compression
description (X330WAN-2USP Serial interface context)
Use the description command to set the description of the interface. The no form
of this command removes the interface’s description.
Note: This command can also be executed from the Serial, Loopback, Fast Ethernet,
and FabricFastEthernet interfaces.
Syntax
[no] description
Parameters
Example
X330WAN-2DS1-1(config-if:FastEthernet1)# description vlan5
idle-character (X330WAN-2USP Serial interface context)
Use the idle-character command to set the bit pattern used to indicate an idle
line. The no form of this command restores flags as the idle line indicator (default).
Syntax
[no] idle-character {flags|marks}
interface type The type of interface.
interface number The interface number.
desc A string describing the interface, up to 80 characters.